APX-3302 User's Manual (OM110000019A)
-57 -
6.7
Strobe output
APX-3302 can output strobe signal that need to connect with external illuminating equipment.
Strobe output is the output signal for adjusting camera exposure timing with external illuminating equipment
and it is outputted from GPOUT terminal.
You can configure output period and delay time from basis signal to output start per 1uS.
■
The setting example for software
The sample code to enable strobe output is as follows.
<Sample code>
6.8
Timing adjustment of CC output and strobe output
You can configure delay time of CC output and strobe output individually.
Basis signal
(Internal)
CC Delay
CC Output
Strobe Output
Strobe Delay
Figure6-16: CC / strobe output timing
CC output and strobe output are outputted as "0", they are outputted as same timing, when begin to supply
power.
// Enable strobe output
AcapSetInfo(hDev, INPUT_CH, ACL_STROBE_EN, -1, 1);
// Configure strobe polarity as positive
AcapSetInfo(hDev, INPUT_CH, ACL_STROBE_POL, -1, 1);
// Reflect setting
AcapReflectParam(hDev, INPUT_CH);
Summary of Contents for APX-3302
Page 1: ...APX 3302 User s Manual ...
