Command
Group
Item
Description
Do
Trigger
Gated
This command initiates the gated triggering mode. Images are
repeatedly acquired until a valid object is detected or this mode is
aborted. The sensor does not transmit a response until the sensor has
completed the action and returned to the READY state. This command
requires the 'Command' trigger mode. The sensor must be in the ready
state to perform the desired operation.
Do
Trigger
AbortGated
This command aborts the gated triggering mode. The sensor does not
transmit a response until the gated triggering option has been aborted
and the sensor has returned to the READY state. This command
requires the 'Command' trigger mode.
5.4.5 Imager Command Group
Command Group
Item
Description
Get
Imager
Gain
The sensor's value used to electronically brighten all image
pixels This value can be modified using the sensor's
touchscreen. This remotely modified value is not persisted to the
sensors permanent memory. The 'Save' operation is required to
persist this value.
Set
Imager
Gain
The sensor's value used to electronically brighten all image
pixels This value can be modified using the sensor's
touchscreen. This remotely modified value is not persisted to the
sensors permanent memory. The 'Save' operation is required to
persist this value.
Get
Imager
Exposure
The sensor's value used to control the amount of time the
imager is allowed to gather light for the image. This value can
be modified using the sensor's touchscreen. This remotely
modified value is not persisted to the sensors permanent
memory. The 'Save' operation is required to persist this value.
Set
Imager
Exposure
The sensor's value used to control the amount of time the
imager is allowed to gather light for the image. This value can
be modified using the sensor's touchscreen. This remotely
modified value is not persisted to the sensors permanent
memory. The 'Save' operation is required to persist this value.
Examples
>>
get imager exposure
\x0D\x0A
<<
OK\x0D\x0A
<<
Command\x0D\x0A
>>
set imager exposure
"11900"\x0D\x0A
<<
OK\x0D\x0A
5.4.6 Teach Command Group
Command
Group
Item
Description
Do
Teach
NextTrigger
This commands forces the sensor to perform the Remote Teach
operation on the next trigger. This command can be performed using
the sensor's touchscreen.
Examples
>>
do teach
\x0D\x0A
<<
OK\x0D\x0A
iVu Plus BCR Communications
23
