- 16 / 20 -
r status!
Get device current status
Get the unit all status:
power, beep, lock, in/
out connection, video/
audio crosspoint,
edid, scaler, network
status
r link in x!
Get the connection status of the
x input port
，
x=0~8(0=all)
r link out y!
Get the connection status of the
y output port
，
y=0~8(0=all)
hdmi input 1: connect
hdmi output 1: connect
s reset!
Reset to factory defaults
Reset to factory defaults
System Initializing...
Initialization Finished!
FW version
x.xx.xx
s beep z!
Enable/Disable buzzer function,
z=0~1(z=0 beep off, z=1 beep on)
beep on
beep off
r fw version!
Get Firmware version
MCU BOOT: Vx.xx.xx
MCU APP: Vx.xx.xx
WEB GUI: Vx.xx
r beep!
Get buzzer state
beep on / beep off
s lock z!
Lock/Unlock front panel button,
z=0~1 (z=0 lock off,z=1 lock on)
r lock!
Get panel button lock state
panel button lock on/off
s lcd on time z!
Set LCD screen remain on time,
z=0~4 (0:off, 1:always on, 2:15s,
3:30s, 4:60s)
lcd on 15 seconds
lcd on 30
seconds
r lcd mode!
Get the backlight status of lcd
screen
lcd always on
s save preset z!
Save switch state between all
output port and the input port to
preset z
,
z=1~8
save to preset 1
s recall preset z!
Call saved preset z scenarios
,
z=1~8
recall from preset 1
s clear preset z!
Clear stored preset z scenarios,
z=1~8
clear preset 1
r preset z!
Get preset z information, z=1~8
video/audio crosspoint
Output Setting
s in x av out y!
Set input x to output y
，
x=1~8
，
y=0~8(0=all)
input 1 -> output 2
r av out y!
Get output y signal status
y=0~8(0=all)
input 1 -> output 1
input 2 -> output 2
……
input 8 -> output 8
Command Code
Function Description
Feedback
Default Setting
beep on
panel button lock on
panel button lock off
panel button
lock off
PTP
r status!
Example
r link in 1!
r link out 1!
s reset!
s beep 1!
r fw version!
r beep!
s lock 1!
r lock!
s lcd on time 1!
r lcd mode!
s save preset 1!
s recall preset 1!
s clear preset 1!
r preset 1!
s in 1 av out 2!
r av out 0!
s logo1
****************!
Set the logo name displayed on
the first line of LCD screen,the
max character is 16
logo1:Initializing…
s logo2
****************!
Set the logo name displayed on
the second line of LCD screen,the
max character is 16
logo2
HDP-MXB88DA!
s logo1
Initializing…!
s logo2
HDP-MXB88DA!
s baud rate xxx!
Set the serial port baud rate of
RS02 module, z=(115200,57600,
38400,19200,9600,4800)
Baudrate:115200
r baud rate!
Get the serial port baud rate of
RS02 module
Baudrate:115200
s id z!
Set the control ID of the product,
z=000~999
id 888!
s baud rate
115200!
r baud rate!
s id 888!
115200
0
