13
PIC6-5
(1)
M Stack list
(2)
Add:
add a new stack at the end of stack list;
(3)
Insert:
insert a new stack
(4)
Delete:
delete the selected stack,
note:
If delete this stack, the components will
be delete as well.
(5)
Edit:
edit selected stack, image as below:
PIC6-6
a)
Stack ID:
1-30 /31-60 for normal feeder, 81-91 for front bulk IC material, 101-119
user defined IC tray, If edit the stack ID, all the component will be changed as
well.
b)
X/Y offset
: Default value is 0, after adjust the picking position, it will be changed.
c)
Take Height:
means picking height, the component in the reel if too high, you
can set the take height.
d)
Take delay:
it means the picking head stopping time on the component. (It is for
heavy component and ICs)
e)
EC height:
means component height, normal component height is 3mm, when
you have higher component, then set this value higher.
f)
Speed:
means the
Z axis
up and down speed
,
0 stands for max speed(100). For
