iSense Ethernet Gateway User
coalesenses
research to innovate
After the build finished, the console output should look similar as shown above.
6.3.
Flashing the Ethernet Gateway
Connect
•
an iSense Ethernet Gateway
•
an iSense Gateway Module
and plug the cable to the PC.
Start iShell, configure the correct communication port,
the appropriate binary according to
Chip
Binary file
JN5148
iApps/NET10DemoApplication/bin/JN51
6.4.
Ethernet Gateway Module Demo Application functionality
The
source
file
of
the
Core
Module
demo
application
is
located
at
NET10DemoApplication/src/NET10
NET10DemoApplication
is derived from
from
isense::ButtonHandler
class
UG_
NET10DemoApplication
public
Application,
public
ButtonHandler,
public
Task
{
public
:
UG_NET10DemoApplication
// inherited from application, called upon device boot
void
boot();
User Guide
After the build finished, the console output should look similar as shown above.
Ethernet Gateway Module Demo Application
Ethernet Gateway Module and
an iSense Gateway Module 2 with a USB cable
configure the correct communication port, and change to the “Flash Loader” view.
the appropriate binary according to the table below.
DemoApplication/bin/JN5148/NET10DemoApplication.bin
Module Demo Application functionality
The
source
file
of
the
Core
Module
demo
application
is
located
at
NET10DemoApplication.cpp
.
The
class
is derived from
isense::Application
, and additionally inherits
Handler
.
NET10DemoApplication
:
ButtonHandler,
NET10DemoApplication(
Os
&os);
// inherited from application, called upon device boot
22 / 30
and change to the “Flash Loader” view. Select
DemoApplication.bin
The
source
file
of
the
Core
Module
demo
application
is
located
at
.
The
class
, and additionally inherits