inS_cnge8MS_reV–
09/17/12 Page 88
INSTALLATION AND OPERATION MANUAL
CNGE8MS
Tech SupporT: 1.888.678.9427
8021x misc
supportimeout [sec.]
G
Use the 802.1x misc supp timeout global
configuration command to set the supplicant
timeout.
switch(config)# 8021x misc
supportimeout 20
8021x misc
servertimeout [sec.]
G
Use the 802.1x misc server timeout global
configuration command to set the server
timeout.
switch(config)#8021x misc
servertimeout 20
8021x misc
maxrequest
[number]
G
Use the 802.1x misc max request global
configuration command to set the MAX
requests.
switch(config)# 8021x misc
maxrequest 3
8021x misc
reauthperiod [sec.]
G
Use the 802.1x misc reauth period global
configuration command to set the reauth
period.
switch(config)# 8021x misc
reauthperiod 3000
8021x portstate
[disable | reject |
accept | authorize]
I
Use the 802.1x port state interface
configuration command to set the state
of the selected port.
switch(config)#interface
fastethernet 3
switch(config-if)#8021x
portstate accept
show 8021x
E Display a summary of the 802.1x properties
and also the port states.
switch>show 8021x
no 8021x
G Disable 802.1x function
switch(config)#no 8021x
Commands Set List—TFTP command set
CNGE8MS
Commands
Level Description
Defaults Example
backup flash:backup_
cfg
G
Save configuration to TFTP and need to
specify the IP of TFTP server and the file
name of image.
switch(config)#backup
flash:backup_cfg
restore flash:restore_
cfg
G
Get configuration from TFTP server and need
to specify the IP of TFTP server and the file
name of image.
switch(config)#restore
flash:restore_cfg
upgrade
flash:upgrade_fw
G
Upgrade firmware by TFTP and need to
specify the IP of TFTP server and the file
name of image.
switch(config)#upgrade
lash:upgrade_fw
