3. PRINTER FUNCTIONS
KPM216H
16
3-
@
C
S
E
[Name]
Initialize printer
[Format]
ASCII
ESC @
Hex
1B
40
Decimal
27
64
[Description]
Clears the data in the print buffer and resets the printer mode to that in
effect when power was turned on.
[Notes]
• The data in the receiver buffer is not cleared.
• The macro definitions are not cleared.
[Default]
[Reference]
[Example]
n
J
C
S
E
[Name]
Print and paper feed
[Format]
ASCII
ESC J
n
Hex
1B
4A n
Decimal
27
74
n
[Range]
0
≤
n
≤
255
[Description]
Prints the data in the print buffer and feeds the paper [ n
×
(vertical or
horizontal motion unit)] inches.
[Notes]
• After printing has been completed, this command sets the print starting
position to the beginning of the line.
• The horizontal and vertical motion units are specified by
GS P or GS
$D0
.
•
GS P or GS $D0
can change the vertical (and horizontal) motion unit.
However, the value cannot be less than the minimum vertical movement
amount.
• In standard mode, the vertical motion unit is used.
[Default]
[Reference]
GS P or GS $D0
[Example]
n
E
C
S
E
[Name]
Turn emphasized mode on/off
[Format]
ASCII
ESC E
n
Hex
1B
45
n
Decimal
27
69
n
[Range]
0
≤
n
≤
255
[Description]
Turns emphasized mode on/off.
• When the LSB of
n
is 0, the emphasized mode is off.
• When the LSB of
n
is 1, the emphasized mode is on.