802.11 a/b/g Access Point Command Line Interface Manual
23
12
T
ELNET
&
SSH
C
OMMANDS
TFTP&FTP Commands:
Command:
Function
Syntax
tftp get
Get a file from TFTP Server.
tftp get Filename<string>
tftp uploadtxt
Upload the configuration of the device to TFTP Server. tftp
uploadtxt
Filename<string>
tftp srvip
Setup the TFTP Server IP address.
tftp srvip <xxx.xxx.xxx.xxx>
tftp update
Update the file to the device.
tftp update
tftp info
Information about the TFTPC setting.
tftp info
get telnet
Display Telnet Status of current login, number of login attempts, etc.
get telnet
get timeout
Display Telnet Timeout in seconds
get timeout
set telnet
Set Telnet Access/SSL Mode to enabled or disabled
set telnet <0:1:2>
Explanation:
0=disable telnet and enable SSL
1=enable telnet and disable SSL
2=disable both telnet and SSL
set timeout
Set Telnet Timeout in seconds, 0 is never and 900 seconds is the
maximum <0-900>
set timeout <0-900>
ftp
Software Update TFP File Via FTP
ftp <xxx.xxx.xxx.xxx>
ftpcon srvip
Set The FTP Server IP Address
ftpcon srvip <xxx.xxx.xxx.xxx>
ftpcon downloadtxt
Update configure file From FTP Server
ftpcon downloadtxt
ftpcon uploadtxt
Set The File And Upload To Server in text File
ftpcon uploadtxt
ssl srvip
Set FTP Server IP Address
ssl srvip <xxx.xxx.xxx.xxx>
ssl usrpwd
Set The User Name And Password For Loginning To FTP Server
ssl usrpwd <usrname> <password>
ssl ftpget
Display File From FTP Server
ssl ftpget <cert file> <key ca file>
ssl info
Display The Information Of The SSL
ssl info
SSH Commands
Command:
Function
Syntax
ssh showuser
Show SSH User
ssh showuser
ssh loaddefault
Load SSH Default Setting
ssh loaddefault
ssh showalgorithm
Show SSH Algorithm ssh
showalgorithm
