Digi ETHERIOS ConnectCore 6 Reference Manual Download

Page: 9 / 15

ConnectCore 6 Linux BSP Reference Manual

Real Time Clock (RTC)

The Dialog DA9030 PMIC provides an Real Time Clock (RTC) circuit with alarm function. To

preserve the date and time during power off, the RTC must be powered externally through a

battery.

DA9030 PMIC’s binding is described at

Documentation/devicetree/bindings/mfd/da9063.txt

For information about RTC control in Linux please refer to the kernel documentation at

Documentation/rtc.txt

A sample application called

rtc_test

is available and can be added to the rootfs by adding “dey-

examples” to the EXTRA_IMAGE_FEATURES of your

local.conf

or by adding “dey-examples-

rtc” to IMAGE_INSTALL_append.

SD/SDIO/MMC controller

The CPU has four uSDHC controllers:

• uSDHC1 is internally connected to the Atheros wireless chip.

• uSDHC2 is available at the module and connected in the development board to a micro SD

socket.

• uSDCH3 is available at the module but also internally connected to the Atheros chip Bluetooth

UART in modules with Bluetooth support (in such modules this controller cannot be used).

• uSDHC4 is internally connected to the eMMC.

MMC binding is described at

Documentation/devicetree/bindings/mmc/mmc.txt

Serial port

The CPU has five UARTs. UART1 is a full modem whereas the other four UARTS (2..5) are only

four wires.

UART2 is internally connected to the Atheros chip Bluetooth UART in modules with Bluetooth

support (in such modules this UART cannot be used).

Please refer to the hardware reference manual of your board to determine available ports and

multiplexed functionality.

The driver only supports RS-232 mode.

UART binding is described at

Documentation/devicetree/

bindings/tty/serial/fsl-imx-uart.txt

The standard serial programming API applies to the serial ports. For information about serial

programming, see the

Serial Programming HOWTO

http://tldp.org/HOWTO/Serial-

Programming-HOWTO/index.html

or the

Serial Programming Guide for POSIX Operating Systems

http://digilander.libero.it/robang/rubrica/serial.htm

Summary of Contents for ETHERIOS ConnectCore 6
















Search results

Summary of Contents for ETHERIOS ConnectCore 6

Reviews:

Related manuals for ETHERIOS ConnectCore 6

Brands by name

Popular brands

Digi ETHERIOS ConnectCore 6, Reference Manual

Search results

Summary of Contents for ETHERIOS ConnectCore 6

Reviews:

Related manuals for ETHERIOS ConnectCore 6

Brands by name

Popular brands