GPS tracking system
- 12 -
Disable GPRS
Command:
S0
The device will reply “GPRS OFF”.
Reconnect GPRS
Reconnect the website via GPRS for real time tracking, please send
S2
Check APN & IP, Port
Command:
G1
The device will reply “APN: internet; Name: xxx; Password: xxxx; Port: 5050; IP:www.smart-tracking.com”
Change IP and Port
Command:
IP1,IP/domain name,port
Example: IP1,103.21.211.11,5050 or IP1,www.smart-tracking.com,5050
Disable SMS alert
Command:
SMS0
It only send alarms via GPRS to the platform and without text message to the authorized numbers.
Enable SMS and GPRS alarms, just simply send
SMS1
(default setting)
Reboot device
Command:
reboot
The device will restart itself without changing any settings.
Initialization:
Command:
RESET!
Note: This is to make all settings back to the factory default.
Built-in Memory
The device built in 8MB flash memory inside. It will store the GPS information when do not have GSM network coverage (i.e., very low population density
areas, some mountainous terrain, underground areas etc). The device will transmit GPS locations to the WEB server automatically once the GSM network is
recovered.
Delete stored tracking history data
Command:
flush
The device will stop sending the stored tracking history data to tracking platform.
