10
Ignition events are not yet detected on hybrid or electric vehicles.
2.7.7 Idle Time Reporting
An idle time event is triggered when the vehicle’s engine is running without the vehicle moving (i.e.,
velocity less than 3 KPH) for a defined period of time in seconds (e.g., 300 seconds).
The alert is cleared when the vehicle speed exceeds another speed and time threshold.
Both the violation and clearing of the alert are reported if configured.
The following AT Command example sets the idle time speed threshold to 3 KPH for 5 minutes (300
seconds) with a clearance time of 30 seconds. If the speed remains below this threshold for 300 seconds (5
minutes), it triggers the input event. Restoring speed above this threshold for 30 seconds will clear this
event.
AT$OBDIDL=3,300,30
2.7.8 Low Fuel Alert
The low fuel alert triggers when the vehicle’s fuel level falls below a defined threshold in percent (e.g.,
12%) for a defined period of time in seconds (e.g., 60 seconds).
The following AT Command example sets the low fuel alert threshold to 12% for 1 minute (60 seconds)
with a clearance time of 30 seconds. If the fuel level remains below this threshold for 60 seconds, it
triggers the input event. Restoring the fuel level above this threshold for 30 seconds will clear this event.
AT$OBDLFL=12,60,30
2.7.9 Rapid Acceleration
Rapid acceleration events can be triggered when one of three available thresholds are exceeded as
determined by the accelerometer in milli-Gs (e.g., 0.75) for a defined period of time in seconds (e.g., 30
seconds).
The following AT Command example sets the rapid acceleration threshold #1 to .2G. If this threshold is
exceeded for 1 second, then an input event is triggered. Keeping the acceleration of the vehicle below this
threshold for 30 seconds will clear this event.
AT$OBDACL=1,200,1,30
