v0.9 | 22
Questions? Feedback? Please contact
Michael Thot
or assign him a Task using
this template
.
11. In the QFIL main menu, click Download to begin loading the packages onto the device.
12. After download is successful, the unit should power cycle automatically.
a. After 1 minute or so, the device should enumerate in the
Device Manager
tool as
Gemini
(under
Universal Serial Bus devices
), and the power LED should be
blue.
i.
If the device does not enumerate as
Gemini
press the capture button for
5 second. This should reboot the device and prompt it to communicate
with your computer.
13. If all of the above worked, your device should show up in adb if you run the
adb
devices
command
:
Firmware Update (
no longer needed in images newer than 07/17
)
If the
adb devices
command displays your device correctly, you are ready to update the
MCU FW with following commands:
1.
adb root
