133
NO
Command
Syntax
Example
18
FP_LOCKOUT
Command:
SEND_COMMAND <DEV>,
“’FP_LOCKOUT-<DISABLE|ENABL
E>’”
Return:
FP_LOCKOUT-<DISABLE|ENABLE>
Description:
Enables or Disables whether the
Front Panel is supposed to be locked
out.
Command:
SEND_COMMAND
SWITCHER,
“’FP_LOCKOUT-ENABLE’
”
Return:
FP_LOCKOUT-ENABLE
19
?FP_LOCKOUT
Command:
SEND_COMMAND <DEV>,
“’?FP_LOCKOUT’”
Return:
FP_LOCKOUT-<DISABLE|ENABLE>
Description:
Requests to see if the Front Panel is
locked out.
Command:
SEND_COMMAND
SWITCHER ,
“’?FP_LOCKOUT’”
Return:
FP_LOCKOUT-DISABLE
20
FP_LOCKTYPE
Command:
SEND_COMMAND <DEV>,
“’FP_LOCKTYPE-<value>’”
Return:
FP_LOCKTYPE-<value>
Description:
Sets the lockout type for front panel.
Variable:
value = {1: lock out all menus; 2:
reserved; 3: lockout configure menu
only}
Command:
SEND_COMMAND
SWITCHER ,
“’FP_LOCKTYPE--1’”
Return:
FP_LOCKTYPE--1
21
?FP_LOCKTYPE
Command:
SEND_COMMAND <DEV>,
“’?FP_LOCKTYPE’”
Return:
FP_LOCKTYPE-<value>
Description:
Requests the type of lockout set for
the front panel.
Command:
SEND_COMMAND
SWITCHER,
“’?FP_LOCKTYPE’”
Return:
FP_LOCKTYPE-1