manualshive.com logo in svg

Hitachi H8/300L Series, Programming Manual

The Hitachi H8/300L Series Programming Manual, available for free download, is a comprehensive guide for users looking to maximize the potential of their device. Explore detailed instructions, programming techniques, and valuable tips to unlock the full capabilities of your H8/300L Series. Download the manual from 88.208.23.73:8080 today.

Share
Download
background image

ii

2.2.17 BSET (bit set) ................................................................................................... 65
2.2.18 BSR (branch to subroutine)............................................................................... 67
2.2.19 BST (bit store) .................................................................................................. 68
2.2.20 BTST (bit test).................................................................................................. 70
2.2.21 BXOR (bit exclusive OR) ................................................................................. 72
2.2.22 (1) CMP (compare) (byte) CMP........................................................................ 74
2.2.22 (2) CMP (compare) (word)................................................................................ 75
2.2.23 DAA (decimal adjust add) ................................................................................ 76
2.2.24 DAS (decimal adjust subtract) .......................................................................... 78
2.2.25 DEC (decrement) .............................................................................................. 79
2.2.26 DIVXU (divide extend as unsigned).................................................................. 80
2.227 EEPMOV (move date to EEPROM)................................................................... 83
2.2.28 INC (increment ................................................................................................. 85
2.2.29 JMP (jump)....................................................................................................... 86
2.2.30 JSR (Jump to subroutine) .................................................................................. 87
2.2.31 LDC (load to control register) ........................................................................... 88
2.2.32 (1) MOV (move data) (byte) ............................................................................. 89
2.2.32(2) MOV (move data) (word) ............................................................................. 90
2.2.32(3) MOV (move data) (byte) .............................................................................. 91
2.2.32(4) MOV (move data) (word) ............................................................................. 93
2.2.32(5) MOV (move) data) (byte) ............................................................................. 95
2.2.32(6) MOV (move data) (word) ............................................................................. 96
2.2.33 MULXU (multiply extend as unsigned) ............................................................ 98
2.2.34 NEG (negate).................................................................................................... 99
2.2.35 NOP (no operation)........................................................................................... 100
2.2.36 NOT (NOT = logical complement) ................................................................... 101
2.2.37 OR (inclusive OR logical)................................................................................. 102
2.2.38 ORC (inclusive OR control register) ................................................................. 103
2.2.39 POP (pop data).................................................................................................. 104
2.2.40 PUSH (push data) ............................................................................................. 105
2.2.41 ROTL (rotate left)............................................................................................. 106
2.2.42 ROTR (rotate right) .......................................................................................... 107
2.2.43 ROTXL (rotate with extend carry left) .............................................................. 108
2.2.44 ROTXR (rotate with extend carry right)............................................................ 109
2.2.45 RTE (return from exception)............................................................................. 110
2.2.46 RTS (return from subroutine)............................................................................ 111
2.2.47 SHAL (shift arithmetic left) .............................................................................. 112
2.2.48 SHAR (shift arithmetic right)............................................................................ 113
2.2.49 SHLL (shift logical left).................................................................................... 115
2.2.50 SHLR (shift logical right) ................................................................................. 117
2.2.51 SLEEP (sleep) .................................................................................................. 119
2.2.52 STC (store from control register) ...................................................................... 120
2.2.53(1) SUB (subtract binary) (byte)......................................................................... 121

Summary of Contents for H8/300L Series































































































































































Reviews:

No comments

Related manuals for H8/300L Series

dbx ProVocal Specifications preview
ProVocal
Brand: dbx Pages: 2
Profile LS901-E1 Instruction Manual preview
LS901-E1
Brand: Profile Pages: 6
SMART MOD IIC Installation And Service Manual preview
MOD IIC
Brand: SMART Pages: 15
Jetter JetWeb JX2-PR0FI1 Operator'S Manual preview
JetWeb JX2-PR0FI1
Brand: Jetter Pages: 67
Black Box LT2060A Manual preview
LT2060A
Brand: Black Box Pages: 37
Altera Nios II Hardware Development Manual preview
Nios II
Brand: Altera Pages: 42
ETAS BR-XETK-S4.0 User Manual preview
BR-XETK-S4.0
Brand: ETAS Pages: 82
Omega OMB-DAQBOARD-500 Series User Manual preview
OMB-DAQBOARD-500 Series
Brand: Omega Pages: 48
Ampro Corporation LITTLE BOARD P5X Hardware User Manual preview
LITTLE BOARD P5X
Brand: Ampro Corporation Pages: 121
Planet IPOE-171-60W User Manual preview
IPOE-171-60W
Brand: Planet Pages: 20
StetSom STX2448 User Manual preview
STX2448
Brand: StetSom Pages: 18
Arduino TC4+ Quick Start Manual preview
TC4+
Brand: Arduino Pages: 10
Barco S3 series User Manual preview
S3 series
Brand: Barco Pages: 538
Z3 Technology FV2K-DCK-1x User Instructions preview
FV2K-DCK-1x
Brand: Z3 Technology Pages: 94
VAMISOUND Schoeps electret Building Instructions preview
Schoeps electret
Brand: VAMISOUND Pages: 15
Acromag XVPX-6300 User Manual preview
XVPX-6300
Brand: Acromag Pages: 20
Advantage Boost Box Setup Manual preview
Boost Box
Brand: Advantage Pages: 4
Advantech AIMB-788 User Manual preview
AIMB-788
Brand: Advantech Pages: 114

Brands by name

Popular brands

Load more brands