36
[Sysname] cfd meplist 9 to 15 service-instance 5
Related commands
•
cfd
md
•
cfd
service-instance
cfd mip-rule
Use
cfd mip-rule
to configure the rules for generating MIPs. The system automatically generates
MIPs on each port according to the rules configured.
Use
undo cfd mip-rule
to restore the default.
Syntax
cfd mip-rule
{
default
|
explicit
}
service-instance
instance-id
undo cfd mip-rule
[
default
|
explicit
]
service-instance
instance-id
Default
No rules for generating MIPs are configured and the system does not automatically generate any
MIPs.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
default
: Specifies the default rule. If no lower-level MIP exists on an interface, a MIP is created on
the current level. A MIP can be created even if no MEP is configured on the interface.
explicit
: Specifies the explicit rule. If no lower-level MIP exists and a lower-level MEP exists on an
interface, a MIP is created at the current level. A MIP can be created only when a lower-level MEP is
created on the interface.
service-instance
instance-id
: Specifies the service instance ID in the range of 1 to 32767.
Examples
# Configure the MIP generation rule as default in service instance 5.
<Sysname> system-view
[Sysname] cfd mip-rule default service-instance 5
cfd service-instance
Use
cfd service-instance
to create a service instance with the MD name.
Use
undo cfd service-instance
to remove the service instance.
Syntax
cfd service-instance
instance-id
ma-id
{
icc-based
icc-name
|
integer
ma-num
|
string
ma-name
|
vlan-based
[
vlan-id
] } [
ma-index
index-value
]
md
md-name
vlan
vlan-id
undo cfd service-instance
instance-id
Default
No service instance exists.
