HS-1RS User’s Manual
Page 31
RFID Read Block
The HS-1RS can read the hex value-data stored in various RFID blocks from a tag at once or
you can tell it to output specific ones.
RFIDRBK
uses the following arguments:
-TagType(1=IS015693,2=MfUL,3=MfClassic,4=Topaz)
-Block Number (0-xx)
-HexKey(optional for MifareClassic Only)
-KeyType(optional for MifareClassic Only,0=A,1=B)
Example codes:
RFID Read Block #0 of ISO 15693 tag
RFID Read Block #3 of ISO 15693 tag
RFID Read Block #2 of a Topaz tag
RFID Read Block #4 of MiFare Classic tag
RFID Write Block
The HS-1RS can write data to specific blocks as well, using the same arguments as RFID Read
Block command, where the block data can only contain 8 hex characters (0-9 and A-F) per block:
RFIDWBK
uses the following arguments:
-TagType(1=IS015693,2=MfUL,3=MfClassic,4=Topaz)
-Block Number (0-xx)
-HexKey(optional for MifareClassic Only)
-KeyType(optional for MifareClassic Only,0=A,1=B)
Example:
RFID Write Block 3 with data ‘1234ABCD’ to an ISO15693 tag
