5: Commands and Levels
EDS-MD® Wired IoT Device Gateway Command Reference
706
server address
<text>
Sets an SMTP server address to direct all outbound
email messages through a mail server.
server port
<number>
Sets the SMTP server port.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
username
<text>
Sets the username for logging in to the mail server.
write
Stores the current configuration in permanent
memory.
ssh (ssh) level commands
client
Enters the SSH Client configuration level.
clrscrn
Clears the screen.
exit
Exits to the enable level.
server
Enters the SSH Server configuration level.
show history
Displays the last 20 commands entered during the
current CLI session.
write
Stores the current configuration in permanent
memory.
ssh (config-cli-ssh) level commands
clrscrn
Clears the screen.
default max sessions
Restores the default maximum allowed concurrent
incoming SSH sessions.
default port
Restores the default local port to the SSH server.
exit
Exits to the CLI level.
max sessions
<number>
Sets the maximum allowed concurrent incoming
SSH sessions. <number> = number of sessions.
port
<number>
Sets the local port that the SSH server uses.
<number> = local port number.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the
current CLI session.
show statistics
Displays the SSH server statistics.
state disable
Disables the SSH Server.
state enable
Enables the SSH Server.
write
Stores the current configuration in permanent
memory.
ssl (ssl) level commands
clrscrn
Clears the screen.
credentials
Enters the SSL credentials configuration level.
exit
Exits to the enable level.
show history
Displays the last 20 commands entered during the
current CLI session.
trusted authorities
Enters the SSL configuration level.
write
Stores the current configuration in permanent
memory.
static leases 1 (config-dhcpd-static_leases:1) level commands
clrscrn
Clears the screen.
