139-0647-01.36
Appendix A - Telnet and HTTP Protcols
36
to be activated
event_number_1, … event_number_n – numbers of events
to be deactivated
m+n<=2
Request event status
0xB0, 0xBC, 0xF0
Reply to activate/deactivate event command: status of
updated events
0xB0, 0xCA, event_address_i, event_status_i, < event_
address_j, event_status_j>, 0xF0
event_address_i, event_status_i, < event_address_j,
event_status_j>– addresses and status of events updated
by the command reply is generated for
Reply to request event status command: status of all 2
events
0xB0, 0xBC, status_byte, 0xF0
status_byte: bits 3-2: status of event #2, bits 1-0: status
of event #1
Event status description (1 bit)
Value
1
2
3
Status
Off
On Processing
Beacon request
“AMX\r”
Beacon
“AMXB<-SDKClass=Utility><-Make=Lyntec><-
Model=NPAC><-Revision=1.1.4>\r”
(rev changed from 1.1.3; 1.1.3 supported old protocol)
Device Discovery
Emergency override response
to relay, zone, or event on/off
command
