J
,
i
6.
LR: Linking Read from EP-ROM To Memory
By this command,
the contents of the EP-ROM are read
in order,
and stored in the memory.
Before execution of
the command,
it is necessary to execute 'RD' command.
The input format of this command is as follows.
[EP-ROM Type]
<RETURN>
Command name LR
B, C, D or E
B
<RETURN>
READ 2716
ADDRESS 3800
SET
PROM
ON THE SOCKET OK THEN HIT ANY KEY
After you have set
the EP-ROM correctly, hit any key.
So, the contents of the EP-ROM are loaded
to the next
address of the previous contents read before.
DATA IS STORED FROM 3800 TO 3FFF
B
<RETURN>
READ 2716
ADDRESS 4000
SET PROM ON THE SOCKET
OK
THEN HIT
ANY
KEY
MC: Memory Change
This command being used when changing the contents
of the memory.
The following explains an input
format of the command.
[Memory Address]
<RETURN>
Command name MC
:
4 characters
4000
<RETURN>
4000 00 55
<RETURN>
-----
55 : A changing data
4001 00
<RETURN>
Address increment
4002 00
<RETURN>
4003 00
<RETURN>
4002 00
<RETURN>
Address decrement
4001 00
<RETURN>
4000 55
<RETURN>
Return command
When you press <RETURN>
key only, this command will
display the next forward address.
However,
key and then press <RETURN> key.
if you press
This command will display the preceding address.
MF: Make
File (EP-ROM)
This command makes the
File by a format
of
File Name.HEX > and saves
the
of the
EP-ROM.
And before executing this program, it is necessary to
execute
'RD' ,
'LR' commands.
Input format
of the
commands is as follows.
[Drive Name
File Name]
<RETURN> .
Command name MF
Drive name --- A-H
(If you omit or forget
to
input the
drive name,
then automatically the
drive's name currently in use get
selected.)
File name
--- English figures and codes
(Maximum of 8
fi
ures,
be fixed to
'HEX
file type will
