© MuxLab Inc.
HDMI 4x8 & 8x8 Matrix Switch, HDBT, PoE Installation Guide
5. Get (Continued)
get -o
Description:
Get the connection state of all output ports
Arguments:
<none>
Example:
Get connection state of all output ports
get -o
Response:
Output 01 connected to: 03
Output 02 connected to: 04
Output 03 connected to: none
…{and so on}
(or an error message if the command failed)
6. Help
help or ?
Description:
Display all the command list definition available
Arguments:
<none>
Example:
Display all the command list
help
?
Response:
connect
connect –i <input port #> -o <output port #> {Connect 1 input port to 1 output port}
connect -i <input port #> -o all {Connect 1 input port to all output port}
connect -i <input port #> -o <from output port #>..<to output port #> {Connect 1 input port
to a specific range of output port}
disconnect
disconnect -i <input port #> {Disconnect 1 input port}
disconnect -o <output port #> {Disconnect 1 output port}
disconnect -all {Disconnect all input/output port}
…
{and so on}
version
version <no parameters> {Get the current firmware version}
Page 47
