N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (ISCLI) 120
Table 130 RIP Interface Configuration commands
Command
Description
[no] ip rip default-action
{both|listen|supply}
When listen, the switch accepts RIP default routes from other routers, but
gives them lower priority than configured default gateways. When supply, the
switch sends RIP default routes to other routers. When both, the switch
operates as both "listen" and "supply". When no, the switch rejects RIP
default routes. This command is disabled by default.
Command mode
: Interface IP
ip rip metric <
1-15
>
Configures the route metric, which indicates the relative distance to the
destination. The default value is
1
.
Command mode
: Interface IP
[no] ip rip authentication
type password
Configures the authentication type. The default is
none
.
Command mode
: Interface IP
[no] ip rip authentication
key <
password
>
Configures the authentication key password.
Command mod
e: Interface IP
ip rip enable
Enables this RIP interface.
Command mode
: Interface IP
no ip rip enable
Disables this RIP interface. This is the default.
Command mode
: Interface IP
show interface ip <
1-256
>
rip
Displays the current RIP configuration.
Command mode
: All except User EXEC
RIP Route Redistribution configuration
The following table describes the RIP Route Redistribute commands.
Table 131 RIP Redistribute commands
Command
Description
redistribute
{fixed|static|ospf|eospf}
<
1-32
>
Adds selected routing maps to the RIP route redistribution list. This option
adds a route map to the route redistribution list. The routes of the
redistribution protocol matched by the route maps in the route redistribution
list will be redistributed.
Command mode
: Router RIP
no redistribute
{fixed|static|ospf|eospf}
<
1-32
>
Removes the route map from the RIP route redistribution list.
Command mode
: Router RIP
[no] redistribute
{fixed|static|ospf|eospf}
export {
metric
<
1-15
>}
Exports the routes of this protocol in which the metric and metric type are
specified. To remove a previous configuration and stop exporting the routes of
the protocol, enter
none
.
Command mode
: Router RIP
show ip rip redistribute
Displays the current RIP route redistribute configuration.
Command mode
: All except User EXEC
