13
Wiegand input formats settings
–
set Wiegand input formats according to the Wiegand output format of the external reader.
Enter the programming mode
* Main code #
Wiegand input bit
8 26~44 # for EM cards the default setting is 26 bits
Disable parity bit
8
0
#
Enable parity bit
8
1
# default settings
Exit the programming mode
*
Important: Programming - see Quick Programming Guide (p.2)!
Users can be added on both the device and an external reader.
Connecting an external fingerprint reader to the device
1. Connect the fingerprint reader to the device.
2. Add a fingerprint (A) on the external reader according to its operating instructions.
3. Add your fingerprint (A) on the device:
Enter the programming mode
* Main code #
Add fingerprint user
–
User ID automatically assigned
1 Scan fingerprint on external reader #
Add fingerprint user
–
User ID manually assigned
1 User ID # Scan fingerprint on external reader #
Exit the programming mode
*
Connecting an external keypad to the device
The external keypad can have 4-bit, 8-bit or 10-bit output format. Adjust the appropriate format to suit your device.
Enter the programming mode
* Main code #
PIN output bits
8 4 or 8 or 10 # default setting is 4 bits
Exit the programming mode
*
Important: Users can be added both on the device and on an external keyboard.
The device works as a Wiegand reader
In this mode of operation, the device works as a Wiegand (26 bit) output and gives the possibility to transfer data by connecting wires to any controller that has
a Wiegand (26 bit) input.
Important: By selecting the operating mode - Wiegand reader, all previous settings (Controller operating mode) will be lost. Connect the brown and yellow wires as
follows:
- Brown - Green LED,
- Yellow - Buzzer.
Wiegand settings
Enter the programming mode
* Main code #
Wiegand input bit
8 26~44 # for EM cards the default setting is 26 bits
PIN output bits
8 4 lub 8 lub 10 # default setting is 4 bits
Disable parity bit
8
0
#
Enable parity bit
8
1
# default settings
Advanced application
