20
20
Resetting the IP address through the console
You can reset the switch’s IP address through the console. This can be helpful in case of
missconfiguration. You will first need to console into the switch as previously described, then:
1
Type “
show ip
” and press
Enter
to see the current IP address.
2
Type “
configure
”
and press
Enter
.
3
Type “
interface vlan 1
” and press
Enter
to edit the VLAN1 interface.
4
Type “
ip address 192.168.1.205 mask 255.255.255.0
” and press
Enter
.
5
Type “
ip default-gateway 192.168.1.99
” and press
Enter
(optional).
The switch should now be accessible on its default IP address.
Factory defaulting through the console
You can factory default the switch through console in case it is not functioning properly. You will
first need to console into the switch as previously described, then:
1
Type “
delete startup-config
” and press
Enter
.
2
Type “
y
” and press
Enter
.
3
Type “
y
”
again to allow the switch to reboot.
The switch will now reboot and come back up at default settings.
Summary of Contents for SX-8P
