C. Assigning an IP Address with the ARP Command
1) Using ARP in Windows
When the PC’s operating system is Windows 98, 2000, Me, XP, or NT, follow the steps below.
•
Open a DOS window and type the following commands.
Arp -s <VersaCam IP address> <VersaCam MAC address>
Ping <VersaCam IP address>
•
Example
Arp -s 192.168.1.3 00-40-8c-10-00-86
Ping 192.168.1.3
2) Using ARP in Windows 95
When the PC’s operating system is Windows 95, follow these steps.
•
Open a DOS window and type the following commands.
Arp -s <VersaCam IP add.> <VersaCam MAC add.> <my PC IP add.>
Ping <VersaCam IP address>
•
Example
Arp -s 192.168.1.3 00-40-8c-10-00-86 192.168.1.2
Ping 192.168.1.3
3) Verifying Installation
After completing the tasks above successfully, the following messages or similar ones will appear on
the screen:
Request timed out
:
Request timed out
Reply from 200.243.232.178: bytes=32 time=2ms TTL=255
Reply from 200.243.232.178: bytes=32 time=2ms TTL=255
Ping statistics for 200.243.232.178:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milliseconds:
Minimum = 1ms, Maximum = 2ms, Average = 1ms
If you don’t receive the reply by using the 'ping' command, try pressing 'F3' and 'Enter' keys again.
Normally ‘Request timed out’ messages appear 7 times before you receive a proper reply.
VersaCam IC-360
User’s Guide
11
