WCDMA Module
UC20 GNSS AT Commands Manual
UC20_GNSS_AT_Commands_Manual Confidential / Released 8 / 25
2
Description of AT Command
2.1. AT+QGPSCFG Configure GNSS
This command can be used to configure the using of GLONASS, switchover of NMEA sentences output
port and setting of power saving and so on.
AT+QGPSCFG Configure GNSS
Test command
AT+QGPSCFG=?
Response
+QGPSCFG:
“outport”,(“none”,”usbnmea”,”uartdebug”,”cmux3”)
+QGPSCFG: “nmeasrc”,(0,1)
+QGPSCFG: “gpsnmeatype”,(0-31)
+QGPSCFG: “glonassnmeatype”,(0-7)
+QGPSCFG: “glonassenable”,(0,1)
+QGPSCFG: “odpcontrol”,(0-2)
+QGPSCFG: “dpoenable”,(0,1)
OK
Configure NMEA sentences out port.
AT+QGPSCFG=“outport”[,<outport>]
Response
When there are two parameters:
OK
or
+CME ERROR: <errcode>
When the second parameter is omitted, query the current
setting:
+QGPSCFG: ”outport”,<outport>
OK
Enable nmeasrc, obtain NMEA
sentences by AT+QGPSGNMEA.
AT+QGPSCFG=“nmeasrc”[,<nmeasrc
>]
Response
When there are two parameters:
OK
or
+CME ERROR: <errcode>
Quectel
Confidential
