Command reference
R&S
®
ZNB/ZNBT
1059
User Manual 1173.9163.02 ─ 62
Parameters:
<ThresholdEnum|LowerThreshold>
T1_9: 10–90% rise time
T2_8: 20–80% rise time
<integer>: Lower rise time threshold as integer percentage
*RST:
T1_9:
<UpperThreshold>
Upper rise time threshold as integer percentage
Options:
R&S
ZNB/ZNBT-K20
Manual operation:
See
7.3.1.15
CALCulate... (other)
............................................................................................. 1059
...............................................................................................1060
.....................................................................................1060
............................................................................................1060
............................................................................1062
CALCulate<Chn>:GDAPerture:SCOunt
..........................................................................1062
................................................................................ 1062
CALCulate<Chn>:IAVerage[:STATe]
...............................................................................1063
............................................................................................. 1063
........................................................................................ 1064
CALCulate<Chn>:SMOothing:APERture
........................................................................ 1064
CALCulate<Chn>:SMOothing[:STATe]
............................................................................1065
..........................................................................................1065
CALCulate:CLIMits:FAIL?
Returns a 0 or 1 to indicate whether or not a global, composite limit check on several
traces has failed.
Since V2.20 of the R&S
ZNB/ZNBT FW the result is automatically recalculated when-
ever a relevant setting is changed, i.e. a subsequent query will return the updated limit
violation state.
Example:
*RST; CALC:LIM:CONT 1 GHZ, 2 GHZ
Define an upper limit line segment in the stimulus range
between 1 GHz and 2 GHz, using default response values.
CALC:LIM:STAT ON; FAIL?
Switch the limit check on and query the result.
CALC:CLIM:FAIL?
Query the result for the composite limit check. As only one trace
is tested, the response should be equal to the previous
response.
Usage:
Query only
Manual operation:
See
SCPI command reference