Rev.1.01 2007.02.16
RJJ10J1643-0101
2
REVISION HISTORY
Rev.
Summary
Date
1.00
06.04.07
1.01
・
Additions and corrections made for support of libraries for the H8/36094, H8/36077,
H8/36109, and R8C/24 and 25
・
Unnecessary periods in Chapter 1, “Instruction,” deleted
・
Port P73 of H8 deleted
・
Channels A–D written in CreateInputCapture corrected to input captures A–D
・
Error in writing “seroal” corrected to “serial”
・
Erroneous description of RAPI_70_STATES corrected
・
Error in writing of timer channel names corrected
・
Error in writing of input capture mode corrected
・
Error in writing of output compare mode corrected
・
Erroneous description of RAPI_OVERFLOW_BIT15 corrected
・
Support for R8C UART1 clock synchronous mode
・
RAPI_COUNT_CLEAR added to first arguments for the R8C and H8/300H in
__CreateInputCapture and __CreateOutputCompare
・
“External signal” deleted from the timer RD count source for the R8C in
__CreateInputCapture and __CreateOutputCompare
・
Following statements added to the item for timer RD in __SetTimerRegister and
__GetTimerRegister
・
[15]: Timer RD output master enable register 1
・
[16]: Timer RD output master enable register 2
・
[17]: Timer RD output control register
・
Explanation for clearing H8/300H module added to the description of __Create...,
__Open..., and __BasicOpen...
・
Explanation for setting H8/300H module for standby added to the description of
__Destroy..., __Close..., and BasicClose...
・
Return value in __PollingSerialReceiving changed from Boolean to unsigned int, and
explanation of return value and example program changed
・
Return value in __PollingSerialSending changed from Boolean to unsigned int, and
explanation of return value and example program changed
・
Remarks regarding use of port B on H8/300H added to __ReadIOPort and
__ReadIOPortRegister
07.02.16
