SunFounder Pironman
Note:
If you are using Raspberry Pi OS Lite, you will need to install
git
and
python3
first, which you can do with
the following commands.
sudo apt update
sudo apt install git python3
-
pip python3
-
setuptools python3
-
smbus
5.3 Modify the Configuration
In the
pironman
module, we have some basic configurations for Pironman, and you can check them with the fol-
lowing command.
pironman
-
c
The current configurations are shown below.
• The fan is turned on at 50 degrees Celsius.
• The duration of the OLED display is 60s, after 60s it will start to sleep.
• Turn on the WS2812 RGB strip so that it displays in color #0a1aff and in breath mode (change rate is 50%).
You can also modify these configurations to suit your needs.
Use
pironman
or
pironman -h
or
pironman --help
to view the instructions, as follows.
Usage:
pironman
<
OPTION
> <
input
>
Options:
start
start pironman service
stop
stop pironman service
restart
restart pironman service
-
h,
--
help
help, show this help
-
c,
--
check
show
all
configurations
-
a,
--
auto
[ on ],enable auto
-
start at boot
[ off ], disable auto
-
start at boot
-
u,
--
unit
[ C
/
F ],
set
the unit of temperature,
C
or
F (Celsius
/
Fahrenheit)
-
f,
--
fan
[ temp ], Temperature at which the fan switches on,
in
celsius (default
50
),
in
range
(
30
~
80
)
-
al,
--
always_on
[on
/
off], whether the screen
is
always on,
default
False
(continues on next page)
24
Chapter 5. 5. Set up the Pironman
Summary of Contents for Pironman
