57
6.1.16
flush #,#,#,#,#,#,#
Initiates all data sending by GPRS to specified target server. Comma separated parameters
go as numbered:
1.# - IMEI
2.# - APN
3.# - GPRS LOGIN
4.# - GPRS PASSWORD
5.# - IP
6.# - PORT
7.# - MODE (0-TCP/1-UDP)
Parameters are separated by comma (no spaces needed). In case you don’t need to enter
parameter (Login/Pass) – do not put space, simply put comma and write next parameter.
Example: opa opa flush 353976012555151,banga,,,212.47.99.62,12050,0
Response details
Description
FLUSH SMS Accepted
FLUSH SMS Accepted
# records found on FLASH
Number of records found on FLASH
Minimum Records to Send: # Number of minimum saved records to send
GPRS Enabled: #
State of the GPRS connection, 0 – disabled; 1 – enabled
Time Sync: #
Indicates time synchronization on the device, 0 – not
synchronized; 1 – synchronized
Example: FLUSH SMS Accepted. 11 records found on FLASH. Minimum Records to Send: 1.
GPRS Enabled: 1. Time Sync: 1.
6.1.17
sn #
Enables or disables Static navigation. 1 – enable, 0 – disable.
6.1.18
banlist
Gives a list of all banned operators.
Example when no operators are banned: 0000.00s.0.000
6.1.19
crashlog
Gives the last information before the device has crashed for unexpected reasons. It is
useful when the device acts unexpectedly or restars for unexplained reasons.
Example if no unexpected reset: “Crash: “
Example if unexpected reset was detected: “Crash: 3051,3052,3053”.
6.1.20
lvcangetprog
CAN program number can be obtained via SMS:
SMS Text: “lvcangetprog”
Response: “CAN Program Nr: XXXX”
6.1.21
lvcansetprog #
Set LV-CAN program number via SMS:
SMS Text: “lvcansetprog 139”
