UIC680 Programmer’s Manual
UDN PM090-C2 Rev. 2.3
For ‘w4’ - return primary account number; else, return 00h.
EXAMPLE:
2 Bytes
Len (1 Byte)
PAN (Max: 19 Bytes)
W2 09h “123456789”
5.2 Contactless Card Operation Command Description
•
G (47H) – ISO 14443 Type Protocol Select
COMMENT
Selects which manual command operated, ISO 14443 Type A or B.
G[Type, 1 byte]
[Type]
0 (30h, ASCII Hex) - ISO 14443 Type A
4 (34h, ASCII Hex) - ISO 14443 Type B
NOTE
The default contactless smart card type is Type A after power up.
RESPONSE ‘^’
-
Acknowledgement
‘*’ - Cannot execute
•
O (4FH) – Antenna power ON
COMMENT
Applies power on the antenna. This command is for manual command
operation.
RESPONSE ‘^’
-
Acknowledgement
‘*’ - Failed, the reader is in Self-Arm mode. The antenna power cannot be
turned on.
•
o (6FH) – Antenna power OFF
COMMENT
Turns the antenna power off.
Response ‘^’
-
Acknowledgement
5-13
