Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-3588 | User Manual 60
6.3
Image Flashing on an Ubuntu Host
6.3.1
Prerequisites
•
VT-SBC-3588
•
An Ubuntu host (Ubuntu 18.04 or later recommended)
•
A USB cable (Type-A to Type-C)
6.3.2
Image flashing
1.
Connect the Device with the host computer via the USB cable;
2.
Open the Terminal and input the following command line to install ADB tool;
$ sudo apt-get install adb -y
3.
Check if the Device is connected to the Ubuntu host via ADB;
$ adb devices -l
4.
Run “adb shell” to execute shell commands on the Device;
5.
Enter “reboot loader”, and the Device will reboot automatically and enter the loader
mode;
6.
Copy the image package provided by Vantron to the Ubuntu host (for instance, in the
Documents folder);
