Vega BS / User Manual
30
Revision 26 of 13 April 2022
ftp://lora_guest:vnm\$4JHW@178.208.75.230:21/BS_x.2/rev.2/BS_1.2_rev.2/globa
l_conf_EU868.json
3.
Make a copy of downloaded file (global_conf_EU868 in our example) with a new
name global_conf.json by the command:
cp EU868_global_conf.json global_conf.json
4.
Open file global_conf.json by the command:
nano LoRa/global_conf.json
and specify parameters, -
“gateway_ID”, “server_address”, “serv_port_up”, “
serv_port_down”, and then save and close the file.
Parameter
gateway_ID is formed out of gateway MAC address and “FFFE” symbols.
For example:
To get gateway MAC address you need to enter a command ifconfig
In out example MAC address is: 98:F0:7B:A7:55:58.
