Z41 Pro / Lite / COM
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
91
Figure 81
Enumerated Control (Text)
The parameters available are:
# Enums
: number of states (up to 6) that will be distinguished. For every
distinguished state, the parameters
Value
and
Icon
will become available, in
order to relate every significant value of the communication object to a certain
icon that will represent it.
Value j
: value (0
– 255) that will be sent through the control object when the user,
after pressing the buttons, sets the control box to state
j
.
Text j
: indicative text that will be displayed in the box when the status object
(which gets automatically updated whenever a control order is sent, although it
may also receive values from the bus) acquires the numerical value defined in
the above parameter.
3.6.2.3.5
Numerical Controls
If the box is assigned any of the six numerical functions, user touches over the buttons
will trigger the sending of a certain numerical value to the bus (which will be progressively
increased or decreased with every touch on one button or the other) through the control
object, while the box itself will permanently reflect the current value of the status object
(which gets automatically updated after a control order is sent, although it may also
receive values from the bus).
Table 3 shows, for each of the six functions, the permitted value range and the name of
the control and status objects.