10
“save ok”.
6.14.4 Logging Clearance: send SMS: “clear+password” to tracker device, it will reply “clear ok”.
6.14.5 Logging Volume: internal Flash ,Can log 16000 position info
6.14.6 The logged data can be copied to computers through card reader, and then the data route
can be checked by importing data in the menu “Data Import” of web platform
6.15 Data Load
6.15.1 Current date Load: Send SMS: “load+ password” to tracker device, it will reply: “load ok”
if the device is working well under GPRS mode; if not, it will reply “load fail! Please check
gprs” that means device does not work under GPRS mode.
6.15.2 Specified date Load
:
Send SMS: “load+ p space+ year month date” to tracker
device, it will reply: “load ok” and load the tracking data to the web platform upon the valid
time you choose. For Example: send SMS: “load123456 20110425” to the tracker device,
means to load the tracking data of 25th April 2011 to web platform.
6.16 Decide how many times of alarm message
You can decide how many times of the alarm message to be sent . For those alarm message
sent in cycle, you can limit the times the alarm message to be sent. Send SMS
“ xtime+p005 “ to tracker, alarm message will be sent 5 times once alarms are
triggered .
Alarm SMS will be sent 5 times by default.
6.17 Alarms
6.17.1 Low battery alarm
Send SMS “lowpspace+on”, it will send SMS “low
latitude/longitude” to authorized
numbers 2 times in total in 15 minutes interval when voltage of battery is going to be about
3.55V.
This function activates by default, send SMS “lowpspace+off” to deactivate.
6.17.2 GPS blind Spot alert
This function deactivates by default . Send SMS “gppspace+on”, it will
send alert SMS “no gps+last valid latitude/longitude before lost signal”
Send SMS “gppspace+off” to deactivate.