ACR3901U-S1 – Reference Manual
info@acs.com.hk
Version 1.09
www.acs.com.hk
Page 57 of 96
7.2. Memory Card Command Set
7.2.1. Memory Card – 1, 2, 4, 8, and 16 kilobit I2C Card
7.2.1.1.
SELECT_CARD_TYPE
This command powers down and up the selected card inserted in the card reader and performs a card
reset.
Note: This command can only be used after the logical smart card reader communication has been
established using the SCardConnect( ) API. For details of SCardConnect( ) API, please refer to
PC/SC specification.
Command Format (
abData
field in the
PC_to_RDR_XfrBlock
)
Pseudo-APDU
CLA
INS
P1
P2
Lc
Card Type
FFh
A4h
00h
00h 01h
01h
Response Data Format (
abData
field in the
RDR_to_PC_DataBlock
)
SW1
SW2
Where:
SW1 SW2
= 90 00h if no error
7.2.1.2.
SELECT_PAGE_SIZE
This command chooses the page size to read the smart card. The default value is 8-byte page write. It
will reset to default value whenever the card is removed or the reader is powered off.
Command Format (
abData
field in the
PC_to_RDR_XfrBlock
)
Pseudo-APDU
CLA
INS
P1
P2
Lc
Page Size
FFh
01h
00h
00h
01h
Where:
Page size
= 03h for 8-byte page write
= 04h for 16-byte page write
= 05h for 32-byte page write
= 06h for 64-byte page write
= 07h for 128-byte page write
