NOTE:
Use this procedure only in the event that the network primary controller is
is missing or otherwise inoperable.
XI. BATTERY CHARGING
NanoMote One has an internal rechargeable battery that will run for three mouths under the
normal use condition. The charger's output should be a micro USB terminal with the specification
of output DC 5V.The LED color is red during the charging process, and it will turn to green if the
charging is finished.
XII. ASSOCIATION AND BASIC COMMAND
1. Association
Association allows the
NanoMote One
to control another Z-wave device directly, such as Smart
Switch, Smart Dimmer, etc.
NanoMote One
supports three association groupings, every group
relates to a specific button action. View details in the follow section of “
XII
. BUTTON FUNCTION”.
Group 1 allows
NanoMote One
sends the central scene notification command and battery report
command.
Group 2 allows
NanoMote One
sends the basic set command.
Group 3 allows
NanoMote One
sends switch multilevel set, the multilevel start level change and
multilevel stop level change command.
Grouping
Identifier
Max Nodes
Send Commands
Group 1
0x05
1. Central Scene Notification.
NanoMote One
will send “Central Scene Notification” to the
associated nodes when the Button is short pressed, held and
released.
2. Battery Report.
NanoMote One
will Send “Battery Report” to the associated nodes
when the Button is triggered during the sleep mode.
3. Device Reset Locally Notification.
NanoMote One will send ‘’
DEVICE_RESET_LOCALLY‘’
to the
associated nodes when the Button is long pressed more than 20s.
Group 2
0x05
1. Basic Set:
NanoMote One
will send “Basic Set (Value= 255/0)” to the
associated nodes when the Button is short pressed.
Group 3
0x05
1.Switch Multilevel Set:
NanoMote One
will Send “Switch Multilevel Set (Value= 255/0)” to
