www.baldormotion.com
C-8 Mint Keyword Summary
MN1901
Keyword
Description
ERRORLOGSAVE
To save the error log to non-volatile EEPROM memory.
ERRORSWITCH
To return the state of the error input.
EVENTACTIVE
Indicates whether an event is currently active.
EVENTDISABLE
To selectively enable and disable Mint events.
EVENTPENDING
To indicate whether an event is currently pending.
FACTORYDEFAULTS
To reset parameter table entries to their default values.
FASTAUXENABLE
To manually clear the auxiliary encoder’s fast position
latch.
FASTAUXENCODER
To return the instantaneous auxiliary encoder value that
was recorded on the fast interrupt.
FASTAUXLATCH
To read the auxiliary encoder fast interrupt latch.
FASTAUXLATCHDISTANCE
To specify the distance over which further auxiliary
encoder latch edges will be ignored.
FASTAUXLATCHEDGE
To select the capture edge for fast capture on the
auxiliary encoder.
FASTAUXLATCHMODE
Sets the default action to be taken to clear the auxiliary
encoder’s fast position latch.
FASTAUXSELECT
To select which of the fast position capture inputs will
capture an auxiliary encoder channel.
FASTENABLE
Manually clears the encoder’s fast position latch.
FASTENCODER
To return the instantaneous encoder value that was
recorded on the fast interrupt.
FASTLATCH
To read the axis fast interrupt latch.
FASTLATCHEDGE
To define which edge polarity should cause the fast
position to be captured.
FASTLATCHMODE
To set the default action to be taken to clear the
encoder’s fast position latch.
FASTPOS
To return the instantaneous axis position that was
recorded on the fast interrupt.
FASTSELECT
To select which of the fast position capture inputs (or
outputs) will cause axis position to be captured.
FEEDBACKFAULTENABLE
To enable or disable detection of motor feedback faults.
FEEDRATE
To set the slew speed of an individual move loaded in
the move buffer.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
