port at a time. Multi-port is not
supported.
HDMI_In M Status
Display the status of an HDMI
input.
M = 1~10
HDMI_In M Name={NameString}
Set the verbose name of an
HDMI input. Maximum 32
characters.
M = 1~10
Note: Can only rename one
port at a time. Multi-port is not
supported.
MixerOut M AudioSrc N=XXX
Set the audio source for an
audio mixer input channel.
M = 1~3
N = A~B
Available XXX values:
HDMI_In n [n=1~10]
OpticIn n [n=1~2]
CoaxIn n [n=1~2]
AnalogIn n [n=1~4]
OAR_In n [n=A~H]
CAT_In n [n=1~2]
MixerOut M Gain N=XXX
Set the gain level of an audio
mixer input channel.
M = 1~3
N = A~B
XXX = 0~100 (units: %)
MixerOut M Mono
Set the output of a mixer
channel to “mono” mode.
Left and right channel outputs
will be the same.
M = 1~3
MixerOut M Stereo
Set the output of a mixer
channel to “stereo” mode.
M = 1~3
MixerOut M Status
Display the status of a mixer
channel.
M = 1~3
SETIP {IP} {Subnet} {Gateway}
Set the IP address, subnet and
gateway in Static IP mode.
Address format: xxx.xxx.xxx.xxx
RSTIP
Request updated IP
information from the DHCP
server.
IPCONFIG
Display the current IP
configuration.
P0
Enter light stand-by mode.
(RS-232, Ethernet and PoH
functionality is still active.)
