D-Link DVG-3004S User Manual
65
route -ip [dst number][e164 number]
route -fxo [dst number][e164 number]
route -print Routing table information.
prefix The prefix of dialed number.
dst Destination port(FXO:1/IP:2).
e164 Destination e164 number(when destination is FXO).
min Min digits.(0 ~ 255)
max Max digits.(0 ~ 255)
hunt Hunt method for busy
forward(NONE:0/GROUP:1/ALL:2).
Example:
route -add prefix 100 dst 1 e164 1001 min 1 max 3 hunt 1
route -ip dst 1 e164 1001
route -fxo dst 2 e164 x
route -modify 1 prefix 100 dst 2 e164 1001 min 1 max 3 hunt 1
route -delete 1
usr/config$
Parameter Usages:
print out all routing table information
-add
add a routing rule in routing table. User can add less than 50
rules. (
route –add prefix “prefix number” dst “destination
port type” e164 “SIP number of port” min “minimum
digits needed” max “maximum digits can’t be
exceeded”
)
-delete
delete a routing rule in routing table (
route –delete “index of
routing rule”
)
-modify
modify a routing rule in routing table. (
route –modify “index
of routing rule” prefix “prefix number” dst “destination
port type” e164 “SIP number of port” min “minimum
digits needed” max “maximum digits can’t be
exceeded”
)
-ip
create routing table for incoming call from IP side. (
route –ip
dst “destination port type” e164 “SIP number of port”
)
-fxo
create routing table for incoming call from FXO Lines.
(
route –fxo dst “destination port type” e164 “SIPnumber
of port”
)
