DTE-3114 – Networked Quad QAM Modulator
USER
MANUAL
44
nwTxFecNumberOfColumns OBJECT-TYPE
SYNTAX Integer32 (0..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of FEC columns to generate."
::= { nwTxEntry 12 }
nwTxIpAddressStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(0),
error(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Destination IP-address resolve status.
0 destination IP address has been resolved
1 failed to resolve destination IP address"
::= { nwTxEntry 13 }
nwTxFecDelay OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nominal time in ms required to receive a sufficient number of packets
to enable correction of an IP packet in a 2D FEC block."
::= { nwTxEntry 14 }
nwTxTsPacketSize OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of the MPEG-2 packets in the transmitted transport stream."
::= { nwTxEntry 15 }
nwTxSettingsStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel status. The status is either 'ok' or an error code.
If multiple errors are active, the status code with the lowest value is
reported. When the error condition is resolved, but another error is
still present, then the corresponding error code will appear."
::= { nwTxEntry 16 }
nwTxTypeOfService OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type Of Service. The generated IP packets will use the
TOS specified by this value."
::= { nwTxEntry 17 }
---------------------------------------------------------------------------
-- DTE Alarm Traps --
---------------------------------------------------------------------------
trTemperatureError NOTIFICATION-TYPE
OBJECTS { tmpTemperature }
STATUS current
DESCRIPTION
"Temperature error. The temperature exceeded the
threshold value set in 'tmpAlarmValue'"
::= { traps 1 }
---------------------------------------------------------------------------
-- Object Groups --
---------------------------------------------------------------------------
--
devTemperatureGroup OBJECT-GROUP
OBJECTS { tmpTemperature,
tmpAlarmEnable,
tmpAlarmValue }
STATUS current
DESCRIPTION
"A collection of objects providing temperature information."
::= { groups 1 }
