User Manual
Modular Multi-service Integrated Optical Transmission Multiplexer
27
In the event that a command has been input, but no valid message
is returned upon clicking ENTER, it means there is trouble
somewhere.
In this manual, we apply the symbol “
” to mark the places where it
is required to click ENTER.
4. E1 configuration
Local E1 configuration:
Command:
setL M mask on [1 2 3 4 5 6 7 8]
; Enable 2M mask function
setL M mask off [1 2 3 4 5 6 7 8]
; Disable 2M mask function
setL M loop on [1 2 3 4 5 6 7 8]
; Enable 2M Loopback function
setL M loop off [1 2 3 4 5 6 7 8]
; Disable 2M Loopback function
setL M loop off 0
; Disable all 2M Loopback function
setL M loop on 0
; Enable all 2M Loopback function
setL M mask on 0
; Enable all 2M mask function
setL M mask off 0
; Disable all 2M mask function
e.g.:
setL M mask on 1 3 7
; Enable signal mask for local 1,3,7 channels of 2M
setL M mask off 2 3 8 4
; Disable signal mask for local 2,3,8,4 channels of 2M
setL M loop on 1 2 3 4 8
; Enable signal loopback for local 1,2,3,4,8 channels
of 2M
setL M loop off 3 4 6 7 8
; Disable signal loopback for local 3,4,6,7,8
channels of 2M
Remote E1 configuration:
setR M mask on 0
; Enable remote 2M full mask
setR M mask off 0
; Disable remote 2M full mask
setR M loop on [1 2 3 4 5 6 7 8]
; Enable 2M Loopback function
setR M loop off [1 2 3 4 5 6 7 8]
; Disable 2M Loopback function
