11.3. Output Control by SMS Text Message
To open or close the gate, send the SMS text message from any of 5 available administrator phone numbers (see
8. ADMINISTRATOR
PHONE NUMBER
for phone number management). The system will turn ON the outputs for a determined time period (pulse) resulting in
the gate opening or closing, depending on the current gate state. The confirmation reply by SMS text message, containing the output name
(see
11.1. Output Names
, will be sent to the administrator phone number that the output control by SMS text message was initiated from.
Turn ON output
for time period
SMS
SMS text message content:
ssss_Co:ON:hr.mn.sc
or
ssss_out-name:ON:hr.mn.sc
Value:
ssss
– 4-digit SMS password;
o
– output number, range - [1... 2];
hr
– hours, range –
[00... 23];
mn
– minutes, range – [00... 59];
sc
– seconds, range – [00... 59];
out-name
– up
to 16 characters output name.
Example:
1111_C2:ON:00.00.09
Config
Tool
This operation may be carried out from the PC using the
GS-Configurator
software.
WEB
BROWSER
This operation may be remotely carried out from the PC using the web browser.
Turn OFF output
for time period
SMS
SMS text message content:
ssss_Co:OFF:hr.mn.sc
or
ssss_out-name:OFF:hr.mn.sc
Value:
ssss
– 4-digit SMS password;
o
– output number, range - [1... 2];
hr
– hours, range –
[00... 23];
mn
– minutes, range – [00... 59];
sc
– seconds, range – [00... 59];
out-name
– up
to 16 characters output name.
Example:
1111_C1:OFF:00.11.49
Config
Tool
This operation may be carried out from the PC using the
GS-Configurator
software.
WEB
BROWSER
This operation may be remotely carried out from the PC using the web browser.
To instantly turn ON/OFF the output and set its state to ON/OFF when the system starts-up, please refer to the following configuration
methods.
Turn ON output/Set
output start-up state
as ON
SMS
SMS text message content:
ssss_Co:ON
or
ssss_out-name:ON
Value:
ssss
– 4-digit SMS password;
o
– output number, range - [1... 2];
out-name
– up to
16 characters output name.
Example:
1111_C1:ON
Config
Tool
This operation may be carried out from the PC using the
GS-Configurator
software.
WEB
BROWSER
This operation may be remotely carried out from the PC using the web browser.
