EUCHNER EKS2, Operating Instructions Manual

Operating Instructions

Electronic-Key-System EKS2

12

(translation of the original operating instructions) 2546099-01-10/21

12.2.  EKS2 status and fault displays

Err

or 

code

ENUM in .NET

Err

or

Meaning

State of safe

-

ty outputs

Reset

LED indicator

Tr

oubleshooting

gr

een

re

d

yellow

Normal operation

-

The device star

ts. Communication not possible.

All of

f

0x00

The device is in operation.

Depending on  the selected  operating  mode

Depending on the car

d status (see 

“12.1. Smar

tcar

d status and fault 

displays”

)

General err

ors

0x01

Enum(EKSErr

or) + 

Value(EKS Err

or Code)

Internal err

or

The device has an internal err

or

.

At least two  outputs on

Reset not possible

Replace the device.

0x02

Enum(EKSErr

or) + 

Value(EKS Err

or Code)

Configuration err

or

Invalid configuration

Reset not possible

1 x

Restar

t the machine.

Output err

or

0x10

Enum(EKSErr

or) + 

Value(EKS Err

or Code)

Invalid output state

The output state is invalid (1-to-n):

Ì

Several outputs ar

e switched (shor

t cir

cuit).

Ì

Wr

ong output is switched.

Ì

The output cannot be switched.

At least two  outputs on

Select operating  mode again or r

estar

t 

via .NET library

2 x

Internal err

or or connection 

err

or

. Check connections. 

0x11

Enum(EKSErr

or) + 

Value(EKS Err

or Code)

Voltage is too high or  too low

.

Voltage monitoring at the outputs r

epor

ts an 

err

or: 

Ì

The output voltage is too high.

Ì

The output voltage is too low

.

Select operating  mode again or r

estar

t 

via .NET library

2 x

Check connections.

Envir

onment err

or

0x20

Enum(EKSErr

or) + 

Value(EKS Err

or Code)

Supply voltage too  high

All of

f

Select operating  mode again or r

estar

t 

via .NET library

3 x

Check connections and power  supply

.

0x21

Enum(EKSErr

or) + 

Value(EKS Err

or Code)

Supply voltage too low

0x22

Enum(EKSErr

or) + 

Value(EKS Err

or Code)

Temperatur

e too high

Check ambient conditions.

0x23

Enum(EKSErr

or) + 

Value(EKS Err

or Code)

Temperatur

e too low

At least two  outputs on

Communication err

or

0x30

-

Communication  timeout

The polling time of 1 s was exceeded. .NET library does not send an err

or code. Err

or 

appears only in the transfer pr

otocol.

Irr

elevant

Reset possible

6 x

No or invalid car

d inser

ted. 

Check connections.

6 x

Car

d is valid. Check connec

-

tions.

-

?

Faulty communication

Only in .NET library: incorr

ect USB connection or 

faulty cable. 

Irr

elevant

Check connections.

Plausibility err

or

0x40

InvalidSelectedMO 

InvalidConfirmedMO 

Invalid selection of  operating mode

Invalid selection of operating mode: 

Ì

The selected operating mode does not match  the authorization.

Ì

The confirmed operating mode does not match  the selected operating mode.

Irr

elevant

Reset possible

See “Normal operation”