Manage Configuration
4
value.
The parameters commonly edited in the cfg$
mac
file are described as follows:
############################################################################
########
## Configuration template for UC924 firmware version 1.0.3.70
############################################################################
########
############################################################################
########
# Account Settings
############################################################################
########
#---------------------------------------
# Account 1--basic setting
#---------------------------------------
# Account Active (In Use). 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P271 = {$line_active. line.1|1}
# Primary SIP Server(eg:sip.mycompany.com or IP address)
# String
P47 = {$server_host. line.1}
# Failover SIP Server (Optional, used when primary server no response)
# String
P967 =
# Second Failover Sip Server (Optional, used when Failover SIP Server no response)
P8851 =
# Prefer Primary SIP Server (Yes-will register to Primary SIP Server if Failover registration
expires)
# Prefer Primary SIP Server (In Use). 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P4567 = 0
# Outbound Proxy(proxy.myprovider.com, or IP address, if any)
# string
P48 =
# Backup Outbound Proxy (This is Usually Set as IP addr)
