1 6
means:
Added field 1 = Idt
Added field 2 = ;
Added field 3 = \cr (carriage return)
Added field 4 = \f1(function key F1)
Added field 5 = \htITS(tab + ITS)
Data Editing Search Command
In working with a user-defined format that is not credit card, CA
DMV, or AAMVA, the EasyMag will support any combination of the
following five search methods:
Length Match: For a particular track, indicate the minimum and
maximum number of characters acceptable for the data editing
formula.
String Match: For a particular track, indicate a specific string of
characters, as well as the character position at which that string
must begin, in order to be acceptable to the data editing formula.
Search Before: For a particular track, the EasyMag will create a
data field which contains all characters that come before the speci-
fied occurrence of a given character sequence. (For example, the
second occurrence of the character sequence ABC.)
Search Between: For a particular track, the EasyMag will create a
data field which contains all characters that come between the
specified occurrence of one sequence of characters and another.
Search After: For a particular track, the EasyMag will create a data
field that contains the specified number of characters that come
after the specified occurrence of a given character sequence. An
offset is used to indicate that the data field starts a certain number of
characters after the searched string.
1 5
Data Editing Setup Commands
The following commands are used to set the operating parameters of
the data editing feature.
Data Editing On/Off, Matched/Unmatched
Syntax: /e/d/fe<space> b1b2 <ENTER>
where:
b1 = 1 Data Editing On
b1 = 0 Data Editing Off
b2 = 1 if no formula matches card data, send out whole card data
b2 = 0 if no formula matches card data, do not send anything
Data Editing Added Field
An output field is created containing the character string. Up to
six fields can be defined. The maximum characters of each field
is six.
Syntax:
/e/d/fr<space>f1<space>f2<space>f3<space>f4
<space>f5<space>f6<ENTER>
where:
Maximum of Added field is six;
Maximum characters of each field is six;
Separator between each field in command is space;
Command:
/e/d/fr<space>Idt<space>;<space>\cr<space>
\f1<space>\htITS<ENTER>