Configuring the Camera
43
RM/TM-4200GE Series
HeightMax:
shows the current valid maximum value for Height.
Width:
sets the width of the output image. When ScanMode is changed it is necessary to set this value to equal
to or less than WidthMax.
Height:
sets the height of the output image. When ScanMode is changed it is necessary to set this value to
equal to or less than HeightMax.
OffsetX:
specify the offset from the left edge of the image captured by the sensor to be sent out of the
camera. Width must be set lower than WidthMax before this value can be increased.
OffsetY:
specify the offset from the top of the image captured by the sensor to be sent out of the camera.
Height must be set lower than HeightMax before this value can be increased.
•
Offset Example:
•
ScanMode is set to B_2048x1000
•
Width to 600 and Height to 100.
•
OffsetX can have a range of 0 to 40. OffsetX is then set to 20.
•
OffsetY can have a range to 0 to 80. OffsetY is then set to 35.
•
The resulting image is of size 600x100 with the upper left pixel offset by 20 pixels horizontally and 35
vertically
Figure 28.
Image Output Example
PixelFormat:
specifies the image type captured from the image sensor. Available options:
Monochrome:
•
Mono8: 8-bit monochrome image.
•
Mono10: 10-bit monochrome image with 1 pixel needing 2 bytes.
•
Mono10Packed: 10-bit monochrome image with 2 pixels packed into 3 bytes.
•
Mono12: 12-bit monochrome image with 1 pixel needing 2 bytes.
•
Mono12Packed: 12-bit monochrome image with 2 pixels packed into 3 bytes.
Bayer: BayerBG patterns are used for Programmable User Scan Area with odd numbered starting row.
•
BayerGR8: 8-bit Bayer pattern with Green and Red pixels in first row.
•
BayerBG8: 8-bit Bayer pattern with Blue and Green pixels in first row.
•
BayerGR10: 10-bit Bayer pattern with Green and Red pixels in first row.
