KP2230 User Manual Version 1.0 EN
www.kaptur-id.com
Data Editing
In some application it is necessary to edit the output of data read in order to optimize the process of the read data. The possible
editing are:
•
ADD PREFIX
•
ADD SUFFIX
•
ADD Barcode Type ID
•
ADD Termination Character
The structure of the transmitted code will be
Prefix
Barcode Type ID
Barcode Value
Suffix
Termination Character
Prefix and Suffix can be max 15 ASCII characters
For the ASCII Table refer to the chapter relative chapter
Add Prefix
Prefix is a string that is customizable by the user. The sting will be added before the data
Enable Prefix
Disable Prefix (Defaut)
Program / Modify Prefix
Save Prefix
If Prefix is disabled (as per Default Configuration) the scanned doesn’t sent out it also if programmed.
Be sure to enable Prefix after having programmed it.
In order to add the Prefix or Suffix proceed as indicate below
1.
Scan the barcode “Modify Prefix”
2.
Check the ASCII table and get the ASCII Code for the Character to add
3.
Scan the barcode of ASCII
4.
Scan the barcode Save Prefix or Suffix
Example: Add character “+” as prefix
On the ASCII Table the character “+” is equal to 2B
