- 10 -
Rev. 1.50
A10plus MiniPrinter
CONFIDENTIAL
DLE EOT n
[Name]
Transmit real-time status
[Format]
ASCII
DLE
EOT
n
Hex
10
04
n
Decimal
16
4
n
[Range]
1
≤
n
≤ 4
[Description] Transmits the real-time status, using
n
as follows:
n
Function
1
Transmit printer status
2
Transmit offline status
3
Transmit error status
4
Transmit roll paper sensor status
[Notes]
■ This is a real-time command that the printer executes upon receiving it.
Take the following into consideration:
• If this command interrupts the code string of another command, this command is
processed as a parameter of the other command; therefore, the print result will not be
correct.
• If a command such as graphics data or defined data has a code string that is
the same as a code string in a parameter, the printer processes and then continues with
the bit-image or other command.
■ With a serial interface model, this command is executed even when the printer is offline, the
receive buffer is full, or an error occurs.
■ With a parallel interface model, this command is not executed in the following conditions,
because the printer is busy and unable to receive data from the host computer.
■ This command can be used when the printer is disabled by
ESC =.
■ This command is ignored when transmitting block data (Header ~ NUL).
■ Each status equals 1 byte.
