Authentication Type: Open System or Shared Key/Shared Key/Open System
If Open System or Shared Key/Shared Key/Open System is selected, users will have to
Set WEP keys with an encryption either
WEP64
or
WEP128
. Only the
Open System
can
set the encryption to
None
(Without any WEP Key protection mechanism)
•
HEX:
If you are using hexadecimal numbers (
0-9, or A-F
).
•
ASCII:
If you are using ASCII characters (
case-sensitive
).
•
Ten hexadecimal digits
or
five ASCII characters
are needed if
64-bit WEP
is used
•
26 hexadecimal digits
or
13 ASCII characters
are needed if
128-bit WEP
is used
Authentication Type: WPA-PSK/WPA2-PSK
If
WPA-PSK/WPA2-PSK
is selected, users will have to select the Encryption from the
pull-down list,
TKIP
,
AES
or
TKIP_AES
and then enter a passphrase.
16