INTERFACE SPECIFICATIONS
SeaBat 8160
Operator‟s Manual
Page 65
October 6, 2011
Version 5
C.3.1.23 Gain Mode
This message sets the gain mode.
Syntax:
*GTYP,N<CR><LF>
Parameters:
N = 0: Fixed
N = 1: TVG
Example:
*GTYP,1<CR><LF>
This example sets the processor to gain mode, TVG
C.3.1.24 Menu
This message sets the menu.
Syntax:
*MENU,N<CR><LF>
Parameters:
N = 0: Main.
N = 1: Filters.
N = 2: Ocean.
N = 3: Off.
N = 4: Display
Example:
*MENU,0<CR><LF>
This message sets the current menu to main menu.
C.3.1.25 Motion Sensor Baud Rate
This message controls the IN baud rate for Serial Port 3. Serial Port 3 IN
receives motion sensor data.
Syntax:
*MSBR,N<CR><LF>
Parameters:
N = Baud Rate.
Valid Rates are 1200, 2400, 4800, 9600, 19200, 38400, 57600,
115200.
Example:
*BAUD,19200<CR><LF>
This message sets the IN baud rate on serial port 3 to 19200.
